Key Technologies of Motor Development

The technical requirements of the motor include: rated value; Working system and quota; Operating conditions; Insulation grade and temperature rise; Dielectric properties; Enclosure protection grade; Cooling method; Structure and installation form; Line end mark and rotation direction; Outline and installation dimensions and their tolerances; Noise and vibration limits; Electrical performance; Working period or reliability; Apparent quality; Safety performance of motor, etc.

Key technologies of motor:

1. Simulation technology and Design Technology

The breakthrough of simulation technology and design technology motor is the product of a comprehensive technology. It is the product of the cross integration of temperature, magnetic field, power and machine. They complement each other and influence each other. For example, the increase or decrease of temperature will affect the electromagnetic size of magnetic materials and the position of magnetic field, which will affect the working efficiency and energy consumption of the motor, which will also directly affect the wear degree of internal parts of the motor, and the change of wear degree will have a certain impact on the temperature of the motor. Therefore, every link in modern motor can not be ignored. Any error in any link will affect the whole body. Therefore, comprehensive simulation technology and design technology are particularly important.

2. High efficiency and energy saving technology

High efficiency and energy saving technology is a constant topic. High efficiency and energy saving also means the improvement of motor working efficiency. Because the motor is the most power consuming part of the whole electromechanical system, it is more important to improve its work efficiency. First of all, we should start with the volume of the motor. The efficiency of the small motor is much higher than that of the large motor; Secondly, we should constantly update the materials of the motor components to minimize the power consumption of the motor in the working process.

3. Adaptability to extreme environment

Adaptability to extreme environment modern motors involve more and more fields, while traditional motors have temperature limitations, which makes the motor lose power in a specific environment. Therefore, if we want modern motor to develop in a wider field, we must improve its adaptability in extreme environment.

Article integration from: 360doc

Editing: Ymf

Key Technologies of Motor Development 1

get in touch with us
Bellum omnium contra
Have You Ever Used Tape Storage
As long as it is related to technology, "never say impossible" to technologies that seem to be outdated. When one day there is a "change of Dynasty", it may "make a comeback", or even become more usable or attractive, and become a good way to solve new problems.It can't be true? Are we stepping into the time machine now? Everyone knows that "tape" is... "Antique" technology! Don't all storage applications now use solid state disk (SSD) or hard disk drive (HDD) memory?The answer is not exactly right. In a recent article in the Wall Street Journal - "companies look to an old technology to protect against new threats", it is mentioned that many companies store data on tape again in case. This is not just an anecdote: there are some powerful data certificates in the market, the unit shipment of tape has increased, and more and more data is stored on tape.Although tape is not as easy to access as SSD or HDD memory, this attribute is also an advantage, especially when the "worst" situation occurs, it can show its strong and slow recovery mechanism. In addition, because tapes cannot be "online", hackers are unlikely to access them. The Wall Street Journal article pointed out that "the government, financial services companies, medical insurance companies and other regulated industries still use tape as a backup system for digital records. Now, some companies are turning back to tape technology because hackers are becoming more and more powerful in penetrating their preventive measures."If you still stick to the old idea that tape is a large volume of disk, it is really out of date; In fact, there are only some archive disks left, and we are lucky to find the playback device. At present, the tape industry has standardized on the easy-to-use tape cartridge, so that it can play and rewind through the manipulator under the large array configuration of the tape drive "field", as shown in the table. Even with the assistance of the international tape storage Council, some standards began to appear, focusing on defining overall dimensions and formats, etc. Tape storage Council is an industry organization established in 2012 to promote the technological innovation and application of tape storage industry.Modern tape drives (lto-7) can be equipped with backup and restore performance up to 750mb / S (2.7tb / HR), and each cartridge can support 15tb of data (source: quantum Corp.)Two key criteria: ltfs and LTOThe two key standards of tape technology are linear tape file system (ltfs) - which can make tape "almost" like HDD; And the linear tape open (LTO) standard developed in the late 1990s as an alternative to the then proprietary tape format. In the "technology advances promote tape to new markets" report recently published by the tape storage Council, it briefly describes the latest progress and application of tape technology.The comparison of tape with SDD or HDD is not limited to security; The tape storage Council believes that reliability and bit error rate (BER) also deserve attention. As shown in the figure below, the quantum lto-7 has an error every 1019 bits, while the HDD of the top gauge has an average error of 1016 bits. The difference of up to three orders of magnitude is really impressive. Other performance comparisons between tape and HDD are also noteworthy, and may even break the traditional myth.Comparing different data storage media shows that high-performance tape provides the lowest bit error rate, even 1000 times better than other technologies (source: tape storage Council)The tape system is also a miniature analog signal and wireless transmission link, even if the stored data is digital. In many ways, it is similar to RF channel, except that RF is replaced by magnetic field for energy transmission. In addition, it also has all the problems that affect the RF "wireless" link, such as jitter, signal-to-noise ratio (SNR), inter symbol interference, signal strength change and so on.Of course, the reading channel starts with the analog preamplifier (installed as close to the reading head itself as possible) and the variable gain amplifier (VGA). But that is only the beginning of analog signal processing, because advanced tape systems use read channels with partial response, maximum likelihood (PRML) signal detection circuits to maximize the chance of successful and zero error data restoration (although the channel is irregular). Although the physical scale may be much smaller than the RF link, the signal path blocks are similar.There seems to be a development element contrary to "going back to the future". Tape is not only the first high-density data storage mechanism (much earlier than HDD), but also an early "amateur" - personal computers (PCS) use Philips Consumer audio tape cartridges as low-cost storage media (of course, low-speed and low-capacity), load the operating system and store programs and data through the "boot loader". Today, tape is not cost-effective for hobbies and business applications, especially high-density HDDs, which are more affordable and random access, but potential tape technology still plays a vital role - and even the trend of "comeback".As usual, I would like to reiterate once again: as long as it is related to technology, it is "never impossible" to say what seems to be outdated technology. When one day the "dynasty changes", it may "reappear in the Jianghu", or even become more usable or attractive, and become a good way to solve new problems.Have you used advanced LTO / ltfs tape technology? Or have you ever used tape storage before?
What Can Smart Parking Cloud Platform Bring Us
Which Is a Good Collar Bluetooth Headset? Easy to Use Collar Bluetooth Headset Recommended
How to Eliminate the Fault of Electronic Connecting Wire
My School Got Rid of Our Gay Club and Added a Bible Club...?
Smart Lighting Has Undoubtedly Become the most Important Development Trend of LED Lighting Industry
Is a 1/5 Ft X 1 Ft Rubbermade Container with Many Very Small Holes Poked in It Good for Two Mice.?
The Myth of the Ice Cream
How Can I Switch My Ps3 From Hdmi to Rca (red/yellow/white) Cables?
Do Your Family Or Friends Knows?
related searches
Have You Ever Used Tape Storage
What Can Smart Parking Cloud Platform Bring Us
Which Is a Good Collar Bluetooth Headset? Easy to Use Collar Bluetooth Headset Recommended
How to Eliminate the Fault of Electronic Connecting Wire
My School Got Rid of Our Gay Club and Added a Bible Club...?
Smart Lighting Has Undoubtedly Become the most Important Development Trend of LED Lighting Industry
Is a 1/5 Ft X 1 Ft Rubbermade Container with Many Very Small Holes Poked in It Good for Two Mice.?
The Myth of the Ice Cream
How Can I Switch My Ps3 From Hdmi to Rca (red/yellow/white) Cables?
  • E-MAIL: angelaliu@aofei-stone.com
  • PHONE : +86 13859989513
  • WHATSAPP : 13859989513
  • ADD : rm No.29e Zhongxinhuiyang Building No.55 North Hubin Road Xiamen China
AOFEI BUILDING MATERIALS
  • Xiamen Aofei Building Materials Co., Ltd. is adhering to the spirit and attitude of serving customers' needs and is willing to offer quality products and services to friends all over the world.
Copyright © 2021 Xiamen Aofei Building Materials Co.,Ltd.  | Sitemap